Mostafavi, S., Hernandez, E. M., Bagheri, B., & Howell, C. (2024). Hybrid Circular Constructs: Symbiosis of Augmented Reality and Digital Fabrication For Discrete Assemblies With Reclaimed Material. In P. C. Herrera, P. Gómez, A. T. Estévez, & D. A. Torreblanca-Díaz (Eds.), Proceedings of the XXVIII International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2024). iBAG-UIC Barcelona, Universitat Internacional de Catalunya, Spain. November 13-15, 2024.

Mehan, A., & Mostafavi, S. (Eds.). (2024). Interdisciplinary and multi-scalar design and research models in architectural practice and education. Architecture. MDPI Press. ISSN: 2813-4346.

Mehan, A., & Mostafavi, S. (Eds.). (2024). Interdisciplinary and multi-scalar design and research models in architectural practice and education. Trends in Higher Education. MDPI Press. ISSN: 2813-4346.

Baharlou, E., Marcus, A., Mostafavi, S., Ng, T. Y., & Yablonina, M. (Eds.). (2024). Ecological levers: On degrees of autonomy and interdependence. International Journal of Architectural Computing, 22(4). ACADIA/IJAC Special Issue. SAGE Publications. ISSN: 202464.

Mostafavi, S., Mehan, A., Howell, C., Montejano, E., & Stuckemeyer, J. (2024). FabriCity-XR: A phygital lattice structure mapping spatial justice – Integrated design to AR-enabled assembly workflow. In G. Barnes & B. Satterfield (Eds.), 112th ACSA Annual Meeting Proceedings, Disruptors on the Edge (pp. 180-187). Vancouver, Canada: ACSA Press. DOI: https://doi.org/10.35483/ACSA.AM.112.25

Mehan, A., & Mostafavi, S. (2023). Navigating AI-enabled modalities of representation and materialization in architecture: Visual tropes, verbal biases, and geo-specificity. The Plan Journal, 8(2), 1-16. https://doi.org/10.15274/tpj.2023.08.02.6

Mostafavi, S., Montejano Hernandez, E., & Bao, D., W. (2024). 3.3. Smart Materials as Architectured Porous and Hybrid Systems to Produce Performative Building Components. In: Kanaani, M (Ed.). The Routledge Companion to Smart Design Thinking in Architecture & Urbanism for a Sustainable, Living Planet. Routledge. ISBN: 9781032469904

Mostafavi, S., Bagheri, B., Bao, D., W., & Mehan, A. (2024). 6.2. Smart Prototyping: From Data-Driven Mass-Customization to Community-Enabled Co-Production. In: Kanaani, M (Ed.). The Routledge Companion to Smart Design Thinking in Architecture & Urbanism for a Sustainable, Living Planet. Routledge. ISBN: 9781032469904

Mostafavi, S., Montejano Hernandez, E., Bagheri, B., Howell, C., Etemadi, A., & Mehan, A. 23-26 May 2024. “Robotic Concrete 3D Printing Continuous Toolpath Planning: From Single Curve to Voxel-based Systems for Design-to-production of Urban Furnitures,” abstract accepted and full paper presented as part of the EAAE/ARCC conference: Architecture into the Unknown, hosted by Aarhus School of Architecture, Denmark. 

Mehan, A., & Mostafavi, S. 23-26 May 2024. “Interdisciplinary Collaboration and Inclusivity: Interdisciplinary Collaboration and Inclusivity: Methodological Innovations in Architectural Practice and Pedagogy,” abstract accepted and full paper presented as part of the EAAE/ARCC conference: Architecture into the Unknown, hosted by Aarhus School of Architecture, Denmark.

Mehan, A., & Mostafavi, S. (2024) Spatial justice through immersive art: an interdisciplinary approach, in Gray, C., Ciliotta Chehade, E., Hekkert, P., Forlano, L., Ciuccarelli, P., Lloyd, P. (eds.), DRS2024: Boston, 23–28 June, Boston, USA. https://doi.org/10.21606/drs.2024.302

Mehan, A., & Mostafavi, S. (2024). Immersive Art and Urban Heritage: An Interdisciplinary Study of Socio-Environmental Justice in Houston and Amsterdam. In Decoding Cultural Heritage (pp. 439–456). Springer Nature Switzerland.

Mostafavi, S., Ghiyasi, T., Montejano Hernandez, E., Howell, C. 26-30 August 2024. “Timber-Dowel Reciprocal Lattice System: Design Computation, Robotic Production and Discrete Assembly,” abstract accepted and full paper presented as part of the IASS 2024 Symposium: Redefining the Art of Structural Design, hosted by the National Centre of Competence in Research (NCCR) Digital Fabrication (dfab), Zurich, Switzerland. In Block, P., Boller, G., DeWolf, C., Pauli, J., & Kaufmann, W.(eds.): In Press.

Mehan, A., & Mostafavi, S. (2024). Emerging technologies in urban design pedagogy: augmented reality applications. In Architectural Intelligence (Vol. 3, Issue 1). Springer Science and Business Media LLC.

Mehan, A., Oduor, N. Mostafavi, S., (2023). “Building Community Resilience in Kenya,” Resilience vs Pandemics, Springer.

Mehan, Asma & Mostafavi, Sina (2023). Temporalities and the Urban Fabric: Co-Producing Liminal Spaces in Transitional Epochs. UoU Scientific Journal (06):116-125.

Mostafavi, S., Mehan, A., 2023. De-Coding Visual Cliches and Verbal Biases: Hybrid Intelligence and Data Justice. In: del Campo M. (eds), Diffusions in Architecture: Artificial Intelligence and Image Generators, John Wiley & Sons, London. ISBN: 978-1394191772

Mehan, A., Mostafavi, S. 12-15 April 2023. “Port Cityscape as Liminal Space: Parasitic Architecture and Building Resilient Communities in Port Cities”, abstract accepted and full paper presented as part of the ARCC 2023 International Conference: The Research- Design Interface, hosted by Texas Tech University in collaboration with the Design Leadership Alliance, Dallas, Texas, US.

Mostafavi, S., Mehan, A., Eshaghi, S., Vaez Afshar, Sepehr, Stuckemeyer, Jessica, Howell C. and Etemadi, A., 2023. Co-production of Liminal Spaces: Tectonics and Politics of Socio-Environmental Justice in Urban Thresholds. In: Miguel Núñez Jiménez (ed.), Venice 2023 Architecture Biennial: Time, Space, Existence, European Cultural Center, Venice, Italy. pp. 264-265.

Mehan, A., Oduor, N. Mostafavi, S., 4 March 2022. “Building Community Resilience in Kenya,” abstract accepted and presented as part of the International Symposium: ‘Post-Pandemic Urban Revolution, Resilience, Autonomy & Community Care’, University Putra Malaysia (UPM), Kuala Lumpur, Malaysia.

Mostafavi, S., Kemper, B., Kretzer, M., Etemadi, A., Hossam, M., Yaseen, A., Nabizadeh, M., Chatterjee, S., Balazadehberenjian, T. (2022). Cobotic Matters - Collaborative Robots and Discrete Assembly Design: From Dry Stacking to Self-Interlocking of Reciprocal Components in Human-Centric. Ahmedabad, CEPT University: The Association for Computer-Aided Architectural Design Research in Asia (CAADRIA).

Morales Beltran, Mostafavi, S. (2022). Topology Optimization Techniques for Architectural Design: A Technique for Obtaining Discrete Structures from Continuum Typologies. In Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the eCAADe 2022, Ghent, 13-16 September 2022, pp. 589–598

Mehan A., Mostafavi S. (2022) Building Resilient Communities Over Time. In: Brears R. (eds) The Palgrave Encyclopedia of Urban and Regional Futures. Palgrave Macmillan, Cham.

Mostafavi, S. (2021) Hybrid Intelligence in Architectural Robotic Materialization (HI-ARM): Computational, Fabrication and Material Intelligence for Multi-Mode Robotic Production of Multi-Scale and Multi-Material Systems, TU Delft A+BE publisher, 1-266, Netherlands.

Kretzer, M., Mostafavi, S. (2021). Bioplastic Robotic Materialization, Design to Robotic Production of Biodegradable Lamps, in ICS Materials, Interactive, Connected and Smart Materials, Edited by Venere Ferraro and Valentina Rognoli, FrancoAngeli Publisher, Milan.

Mostafavi, S., Kastrati, V., Badr H., Mazlan S. (2020) Design Computation to Robotic Production Methods for Reciprocal Tessellation of Free-from Timber Structures, In Werner, L., Koring, D (eds.), Anthropologic – Architecture and Fabrication in the cognitive age - Proceedings of the 38th eCAADe Conference – Technical University of Berlin, Berlin, Germany, 16-17 September 2020.

Kretzer, M., Mostafavi, S. (2021). Bioplastic Robotic Materialization, Design to Robotic Production of Biodegradable Lamps, in ICS Materials, Interactive, Connected and Smart Materials, Edited by Venere Ferraro and Valentina Rognoli, FrancoAngeli Publisher, Milan

Mostafavi, S., Kretzer. (2020) “Adaptive City Car, Collaborative Studio Sponsored by AUDI automotive Manufacturing Company, Video submitted and published in ACADIA 2020.

Mostafavi, S., Kretzer. (2020) “Bioplastic Robotics materialization, Design to Robotic Production of Bio-degradable lamps", Collaborative course between Dessau Department of Design and Dessau Institute of Architecture, Video screened by Docu Team, Juried by ACADIA Committee.

Mostafavi, S. (2021) Hybrid Intelligence in Architectural Robotic Materialization (HI-ARM): Computational, Fabrication and Material Intelligence for Multi-Mode Robotic Production of Multi-Scale and Multi-Material Systems, TU Delft A+BE publisher, 1-266, Netherlands.

Mostafavi, S., Anton, A. (2018) : Materially informed robotic fabrication, architectural robotics and multiscalar material architecture. Book Chapter In: Daas, M., Wit, A.J. (eds.) Towards a Robotic Architecture, pp. 88–99. ORO Editions, Novato, CA.

Mostafavi S., Kemper B.N., Fischer D.L. (2018) Multimode Robotic Materialization, Design to Robotic Fabrication Method of Integrating Subtractively Produced Hard Components and Additively Deposited Soft Silicone. In: Robotic Fabrication in Architecture, Art and Design 2018. ROBARCH 2018. Springer.

Mostafavi, S., Bier, HH., Kemper B.N., Fischer D.L. (2018) Robotic Materialization of Architectural Hybridity - Modelling, Computation and Robotic Production of Multi-materiality, In Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 301-308.

Chiang, Y., S. Mostafavi, and H.H. Bier. (2018) Assembly of shells with bi-stable mechanism, Conference proceeding of Advances in Architectural Geometry, AAG 2018 at Gothenburg.

Chiang, Y., H.H. Bier, and S. Mostafavi.(2018) Design to Robotic Assembly: An Exploration in Stacking, Frontiers in Digital Humanities 5.

Mostafavi, S., Kretzer. (2018) “Bioplastic Robotics materialization, Design to Robotic Production of Bio-degradable lamps", Collaborative course between Dessau Department of Design and Dessau Institute of Architecture, Video screened by Docu Team, Published by Dessau Department of Design.

Mostafavi, S., Bier. H., Moharram, M.S., Hesham, H., El-Meligy, M., Du. C. (2018) “Design to Robotic Production of Intertwined Hybrid of Polystyrene and Fiber Reinforced Concrete" has been accepted and presented at Rob|Arch 2018 (robarch2018.org) through the Robots in Architecture 2018 at ETH Zurich Call for Videos.

Bier. H., Mostafavi, S. (2017) Design to Robotic Production and Operations, Chapter in Architecture and the Machinic, Experimental Encounters of man with Architecture Computation and Robotics, edited by Arie Graafland and Dulmini Perera, pp. 86–91. DIA Architecture School, Dessau.

Mostafavi, S., Anton, A., Bodea, S. (2017) Design to Robotic Production for Informed Materialization Processes. in Cyber Physical Architecture, SPOOL, [S.l.], v. 4, n. 1, dec. 2017.

Liu Cheng, A., Bier, H., and Mostafavi, S. (2017). Deep Learning Object-Recognition in a Design-to-Robotic Production and -Operation Implementation. In Proceedings of the 2nd IEEE Ecuador Technical Chapters Meeting (ETCM 2017) IEEE.

Bier, H., Schmehl, R., Mostafavi, S., Anton, A., & Bodea, S. (2017). Kite-Powered Design-to-Robotic-Production for Affordable Building on Demand. In Proceedings of the 34th International Symposium on Automation and Robotics in Construction (ISARC), Taipei, Taiwan (pp. 566-570). ISBN 978-80-263-1371-7. ISSN 2413-5844. https://doi.org/10.22260/ISARC2017/0078

Mostafavi, S., Bier, S., Anton, A., Bodea, S., Gali, M. (2017). Robotic 3D Printing in Imprimer le Monde, Print The world, Mutations and Creation, Centre Pompidou Exhibition Book.

Mostafavi S., Bier H. (2016) Materially Informed Design to Robotic Production: A Robotic 3D Printing System for Informed Material Deposition. In: Reinhardt D., Saunders R., Burry J. (eds) Robotic Fabrication in Architecture, Art and Design 2016. Springer.

Bier, H., Mostafavi S. (2016) Robotic Building as Physically Built Robotic Environments and Robotically Supported Building Processes. In: Dalton N., Schnädelbach H., Wiberg M., Varoudis T. (eds) Architecture and Interaction. Human–Computer Interaction Series. Springer.

Mostafavi S., Bier H.H., Anton A.M., Bodea S., et al. (2016) “Informed Porosity" has been accepted and presented at Rob|Arch 2016 (robarch2016.org) through the Robots in Architecture 2016 at University of Sydney Call for Videos

Mostafavi S., Bier H.H., Anton A.M., Bodea S., Oosterhuis, K. et al. (2016) “Continuous Variation – Informed Robotic 3D Printing " has been accepted and presented at Rob|Arch 2016 (robarch2016.org) through the Robots in Architecture 2016 at University of Sydney Call for Videos.

Bier, H., Mostafavi, S. (2015) Data-Driven Architectural Design to Production and Operation in open-access journal Systema: Connecting Matter, Life, Culture and Technology.

Mostafavi, S., Bier, HH. Anton, A., Bodea, S (2015), Informed Design to Robotic Production Systems - Developing Robotic 3D Printing System for Informed Material Deposition Real-time eCAADe 2015 proceedings, Vienna, Austria.

Mostafavi, S., Bier, HH.(2015) Robotic 3D printing in Computational Ecologies, Peer reviewed projects proceeding, ACADIA October 2015, Cincinnati, United States.

Bier, HH, Mostafavi, S. (2015) Structural optimization for materially informed design to robotic production processes American Journal of Engineering and Applied Sciences 8 (4), 549-555.(2015).

Bier, HH., Mostafavi, S., Anton, A., Bodea (2015) in the Critical and Clinical Cartographies conference, 3C Int. Conf. Delft, the Netherlands.

Bier, HH and Mostafavi, S. (2014) Data-driven architectural production and operation in J Wilby, S Blachfellner & W Hofkirchner (Eds.), the 22nd European meetings on cybernetics and systems research (pp. 248-255): Bertalanffy Centre for the Study of Systems Science (BCSSS), Vienna, Austria.

Mostafavi, S. and Tanti, M. (2014) Design to fabrication integration and material craftsmanship in, eCAADe Conference, FUSION, September 2014, New Castle, United Kingdom.

Mostafavi, S., Yu. S., and Biloria, N. (2014) Agent based complex design systems in multiple scales in Design Agency, ACADIA October 2014, University of Southern California (USC), Los Angeles, United States.

Bier, H., Mostafavi, S., Anton, A., Bodea, S., Raaphorst, B., Mostart, G., de Jonge, H., van Lit, J., Paclt, J., Siderius, K., Galli, M., Kornecki, M., Anghelache, M. J. O., Low, P., Flis, R., Moors, R., Roodt, R., Hoogenraad, R., Hoeijmakers, S., Kanters, S., IJperlaan, T., Rem, P., Lotfi, S., di Domenica, E., Salet, T., Vos, J., van der Burgt, A., van Wezel, B., Voorend, C., Bekkers, C., Rombouts, I., Gerlings, L., de Vries, M., Bruurs, M., Wolfs, R., Saes, S., Span, T., & Rouwhorst, W. (2014). Robotically driven construction of buildings: Exploring on-demand building components production. SPOOL, 1(2), 31–35. https://doi.org/10.7480/spool.2014.2.933

Mostafavi, S., Beltran, M. M., & Biloria, N. (2013). Performance driven design and design information exchange. eCAADe Proceedings. https://doi.org/10.52842/conf.ecaade.2013.2.117